Made in India Chambers

Xenon ARC Aging Chamber - Model(HB-AC711)

Product Description
Xenon ARC Aging Chamber is specifically for the product to do accelerated aging testing equipment.Xenon ARC Aging Chamber can simulate the full spectrum of sunlight and destructive light waves. It is especially suitable to detect the accelerated aging of outdoor products. And the device is configured with only control systems. Accurate control of the temperature, humidity, light intensity and so on, and can set up 999 cycles of testing. Simple operation, temperature, humidity and light intensity change fast. Save time.
Main Feature:

• Ventilation system: Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system
• Back panel thermometer: adopt wired transmission technology, which highly improve the control accuracy.
• Temperature sensor: PT100 platinum resistance thermocouple.
• Equip with intelligent temperature and humidity controller, with PID adjustment and rapid self-turning. It can set several parameters to do cyclic test, directly digital temperature display for easy reading.
• Multiple protective devices: Over temperature protection, water leakage alarm, over pressure of compressor, electricity leakage protection, alarm and auto power offer protection. In order to protect Xenon light, the light will turn off automatically once open the door.

Main Parameter:

Item	Specification
Internal dimension	(W*D*H) 800*800*800mm
External dimension	(W*D*H) 1450*1500*2000mm
Chamber Temperature	40±3℃
Temperature Uniformity	≤3℃
Blank panel temperature	65±3℃
Humidity Range	50%-90%
Irradiated intensity	0.35±0.02w/m²at 340nm
Xenon lamp power	6.5KW water-cooled xenon lamp x 1pc
Internal chamber material	SUS 304 # Stainless Steel, Anti-rust, easy to clean
Outer chamber material	Stainless steel
Control system	PLC controller, touch screen
Distance from specimen to arc center	250~300mm, Effective exposure area 6400cm2
Max. Sample dimension	200*90mm Thickness＜20mm
Filter	Daylight filter
Door seal	Silicone Rubber Seal
Temperature sensor	PT100 high precision temperature sensor
Air circulation system	Stainless steel centrifugal rotor vane to improve the uniformity of temperature and humidity
Cooling ventilator	Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system
Cooling ventilator	France Tecumseh compressor
Power	AC380V, 50Hz, three phase

Test methods and parameters as per standard ASTM D 4355:

Item	Specification
Duration	150h, 300h, 500h
Light Source	Xenon Arc
Filter	Daylight filters
Irradiated Intensity	0.35±0.02w/m²at 340nm
Temperature of black panel	65±3℃
Relative humidity	50%-90%
Cycles
90min of light only at 65±3℃ and 50%±5% relative humidity
30min of light plus water spray

Safety Protection:

• Over heat protection for fan,
• Over load protection for cooling system,
• Over pressure protection for cooling system,
• Over temperature protection,
• Over heat and over flow protection for water pump,
• Leakage protection, Water shortage protection,
• Auto stop after failure warning

Programmable Controller:

• PIC controller for test chamber
• Step types include: ramp, soak, jump, auto-start, and end
• RS-232 interface to connect computer for output